Home Page Profile Page Product News New Products Contact Hart Wholesale Terms and Privicy Policy Product Index  
 
Kitchen
Sinks & Accessories
Tables
Table Accessories
Taps
PVC Extrusion
Silicone & Glues
Signage
Slide Bolts
Toilet Cubicle F'mts
Wood Mouldings
Our website has now been updated
Please Click Here to visit our brand new e-Commerce site
 
Carousels and Corner Solutions
Please Click on an Image to Enlarge
 

54618200 - Corner Storage Units, Manually Operated

Enlarge Image
• Designed to make efficient storage use of often non-accessible
cupboard corner areas
• (1 pce) Hanging frame with full extension runners. Pull out
assembly with pivoting basket hanging frame to allow access to rear
storage. Securing clips and fixings supplied to enable safe closure of
opening frame. For use with 265 mm deep baskets. Silver epoxy
coated tubular steel.
• (1 pce) Hanging frame with two-way universal runners. Handle supplied to enable ease of access. For use with 365 mm deep baskets.
Silver epoxy coated tubular steel.
• (3 pces) Storage basket, 265 mm deep, chrome-plated steel
• (2 pces) Storage basket, 365 mm deep, chrome-plated steel
   
Product Code
54618200
 
54616257 - Corner Storage Units, Pull-Out Operated
Enlarge Image
• Photos and drawings show right hand version
• For cabinets min. 900 mm wide, min. installation height: 530 mm,
min. installation depth: 480 mm
• Designed so that rear baskets automatically follow front baskets when
door is pulled away from the cupboard. Please note that following action
only takes place when door is fully out and swung open to one side
• Each set comes complete with fixing materials and fitting instructions and includes:
1 x Rear hanging frame and base mounting track, silver epoxy coated tubular steel
1 x Door frame with pivot with door frame follower, silver epoxy coated tubular steel
1 x Back frame, silver epoxy coated tubular steel
1 x Door frame follower, silver epoxy coated steel
4 x Door panel hanging plates, 3 way adjustable, to suit 450, 500 and 600 mm doors.
Zinc plated steel
2 x Storage baskets (rear), 370 mm deep x 430 mm wide, chrome plated steel
2 x Storage baskets (door), 305 mm deep x 450 mm wide, chrome plated steel
8 x Basket securing clips, black plastic
Handed
Mesh Base Version
Linear Base Version
Right Hand
54616250
54616256
Left Hand
54616251
54616256

• Additional door panel
hanging plate
• Zinc plated steel
Door Width
Product No.
450mm
54616994
600mm
54616996
 

54220791 - Mondo 90° Complete Corner Unit

Enlarge Image
• For 90° angled doors • For plinth height 150 mm
• Alternative option to using a conventional base unit and std fittings
• To order the correct set for your construction measure the door aperture, not the door itself
• The rigid doors push in and swivel inside the cabinet with the carousel trays
• Please note that the door will not rotate unless firmly pressed inward
• The Mondo carousel complete corner unit comprises a complete base unit with two carousel trays and is supplied ready assembled and rigid, only the door fronts and work top have to be added
• Set includes:
1 Pre-assembled cylindrical corner cabinet, white epoxy coated steel
2 Carousel trays; white plastic, 1 Door mounting set; white plastic with metal fittings
7 Plinth adjusting feet; black plastic
2 Plinth fastening blocks, white plastic with black plastic fastening clips, can be cut to align the plinth unit with the other units
2 Closure strips, 720 mm long, flexible plastic, to give a softer finish to the carousel walls where they meet the door
• Order side panel retaining bracket separately if the carousel unit is the last in line and an end panel follows it rather than another unit
Important: Doors, drawer fronts and corner posts if all used must be made into one secure part before mounting onto the housing. Important that all movement is restricted
Door aperture
Product No.
     
335mm
54220791
     
340mm
54220792
     
 

54154817 - Half Circle Plastic Carousels

Enlarge Image
• Three sizes of shelf available • Shelves swivel independently
• The upper end of the spindle can be cut if req to fit cabinets with less height
• (2 pcs) Half circle carousel shelf. Carousel for 390 mm minimum door
width has two mounting options. White or cream-white plastic.
• (1 set) Fitting set comprising 500 mm high spindle, top and bottom fittings
and shelf bearings. Silver anodised light alloy spindle. White or cream-white
plastic fittings.
• (1pc) Shelf follower, for mounting on the cabinet door, automatically pulls
out the shelf when the door is opened. White or cream-white plastic.
Finish (Spindle height)
White
(500mm)
Cream-White
(500mm)
White
(552mm)
Cream-White
(552mm)
390mm (min door width)
54154817
54154513
54154844
54154540
440mm (min door width)
54154826
54154522
54154853
54154559
490mm (min door width)
54154835
54154531
54154862
54154568
 

54140822 - Three Quarter Circle Plastic Carousels

Enlarge Image
• Two sizes of shelf available • Shelves swivel independently
• For fitting in cabinets with hinged doors
Please click on line drawing for full dimensions
• (2 pcs) Three-quarter circle carousel shelf. White or cream-white plastic
• (1 set) Fitting set comprising spindle, vertically adjustable from
667 to 713 mm, upper and lower fittings, shelf bearings and brake
mechanism. Fittings attach the spindle to the cabinet at the top and base.
Chrome-plated steel spindle. White or cream-white plastic fittings,
shelf bearings and brake mechanism.
Finish (Spindle height)
White
(667-713mm)
Cream-White
(667-713mm)
White
(708-754mm)
Cream-White
(708-754mm)
800 x 800mm (cabinet)
54140822
54140528
54140859
54140555
900 x 900mm (cabinet)
54140831
54140537
   
 
50101007 - Revolving Fitting
Enlarge Image
• For customers own design three quarter or full circle carousel shelves
• Two sizes available, 700 or 750 mm high
• Comprises spindle, upper and lower screw mounted bearings
and 2 mounting plates
• Mounting plates can be secured at any height
• Nickel-plated steel spindle, galvanized steel mounting plates and white
plastic bearings
700mm 50101007
750mm 50101016
 

54220791 - Mondo 90° Complete Corner Unit

Enlarge Image
• For 90° angled doors • For plinth height 150 mm
• Alternative option to using a conventional base unit and std fittings
• To order the correct set for your construction measure the door aperture, not the door itself
• The rigid doors push in and swivel inside the cabinet with the carousel trays
• Please note that the door will not rotate unless firmly pressed inward
• The Mondo carousel complete corner unit comprises a complete base unit with two carousel trays and is supplied ready assembled and rigid, only the door fronts and work top have to be added
• Set includes:
1 Pre-assembled cylindrical corner cabinet, white epoxy coated steel
2 Carousel trays; white plastic, 1 Door mounting set; white plastic with metal fittings
7 Plinth adjusting feet; black plastic
2 Plinth fastening blocks, white plastic with black plastic fastening clips, can be cut to align the plinth unit with the other units
2 Closure strips, 720 mm long, flexible plastic, to give a softer finish to the carousel walls where they meet the door
• Order side panel retaining bracket separately if the carousel unit is the last in line and an end panel follows it rather than another unit
Important: Doors, drawer fronts and corner posts if all used must be made into one secure part before mounting onto the housing. Important that all movement is restricted
Door aperture
Product No.
     
335mm
54220791
     
340mm
54220792
     
54225700 - L- Shaped Brackets
Enlarge Image
• For strengthening door panel connections
• Fixings included
• 2 included with Mondo carousel. Order additional brackets if required
• Steel
White 54225700
54227798 - Mondo Diagonal Fitting
Enlarge Image
• 2 required per carousel
• For 450 mm wide door
for 450mm wide door 54227798
54228799 - Diagonal Chopping Board
Enlarge Image
• To suit diagonal Mondo carousel
• Fixing screws supplied
• Oiled beech with steel fixing plate
40mm (Worktop thickness) 54228799
 

54227788 - Mondo 2K Carousel Units

Enlarge Image
• Available with or without internal lighting
• Door not included, order separately • For plinth height 150 mm
• For 900 x 900 mm corners
• The convex door panel pushes in and swivels inside the cabinet with the
carousel trays
• The Mondo 2K carousel complete corner unit comprises a complete base
unit with two carousel trays and is supplied ready assembled and rigid,
only the work top has to be added
• Set includes:
1x Pre-assembled cylindrical corner cabinet, white epoxy coated steel
2x Carousel trays; white plastic
7x Plinth adjusting feet; black plastic
2x Plinth fastening blocks, white plastic with black plastic fastening clips, can be cut to align the
plinth unit with the other units
2x Closure strips, 720 mm long, flexible plastic, to give a softer finish to the carousel walls
where they meet the doors
Unit
Product No.
     
Without internal lighting
54227788
     
With internal lighting
54227768
     
54226730 - Mondo 2K Door
Enlarge Image
• For use with Mondo 2K carousel corner unit
Stainless Steel Effect 54226730
Aluminium 54226750
Unfinished Door (with side rails to receive decor panel, for use with 2K corner unit) 54226740
54227700 - Spacer Set
Enlarge Image
• For use with mondo 2K carousel
• Spacer set available with two 10 mm and two 16 mm spacer plates for
fitting in cabinets from 900 x 900 mm to 935 x 935 mm
• Plastic
1 Set 54227700
54228798 - Chopping Board
Enlarge Image
• To suit Mondo 2K carousels
• Concealed screw fixing
• Beech
28mm (Worktop thickness) 54228798
40mm (Worktop thickness) 54227799
54228796 - Chopping Board
Enlarge Image
• To suit Mondo 2K carousels with worktop mounted Eclipse carousels
• Fixing clamp included
• For 40 mm worktops
• Lacquered beech
28mm (Worktop thickness) 54228796
40mm (Worktop thickness) 54228797
 

54236162 - Eclipse Wall and Worktop Complete Units

Enlarge Image
• Set includes:
2 or 3 trays
Interior lighting
Stainless steel or ribbed silver anodised aluminium door
• Soft close mechanism*
• 600 x 600 mm planning dimensions
Height
No. Trays
Door
Product No.
 
1300mm
3
Stainless Steel
54237162
 
1440mm
3
Stainless Steel
54237163
 
1300mm
3
Ribbed Aluminium
54237962
 
1440mm
3
Ribbed Aluminium
54237963
 
 

54237162 - Worktop Mounted Carousels

Enlarge Image
• Set includes:
3 trays, Interior lighting, Stainless steel or ribbed silver anodised
aluminium door
• Soft close mechanism*
• 600 x 600 mm planning dimensions
Height
No. Trays
Door
Product No.
 
870mm*
2
Stainless Steel
54236162
 
1050mm
3
Stainless Steel
54236163
 
870mm
2
Ribbed Aluminium
54236962
 
1050mm
3
Ribbed Aluminium
54236963
 
 
54250211 - Half Circle Wire Carousels
Enlarge Image
• For cabinets with hinged doors, shelves swivel independently
• Min. installation width 766 mm, min. installation depth 460 mm, for min.
door width 365 mm
• The upper end of the spindle can be cut if required to fit cabinets with
less height
2x Half circle carousel shelf, chrome plated steel
1x Fitting set comprising 530 mm high spindle, top and bottom fittings
and shelf bearings. SIlver anodised light alloy spindle. White plastic.
1x Shelf follower, for mounting on the cabinet door, automatically
pulls out the shelf when the door is opened. Silver plastic.
365mm (min door width) 54250211
415mm (min door width) 54250221
 
54163718 - Half Circle Slide Out Carousel
Enlarge Image
• Carousel shelf and fittings which allow the carousel to be swiveled then
further extended by using a slide system
• In any situation where the user has difficulty reaching into a cabinet, this
carousel is useful
• Can be mounted left or right handed
• Complete with pivot fixing bracket
• White plastic coated steel shelf and bracket
425mm (min door width) 54163718
490mm (min door width) 54163727
 
54163718 - Half Circle Slide Out Carousel
Enlarge Image
• For fitting in cabinets with hinged doors, shelves swivel independently
• Min. installation width/depth 730 mm, for min. door width 355 mm
• The upper end of the spindle can be cut if required to fit cabinets
with less height
2x Three quarter circle carousel shelf, chrome plated steel
1x Fitting set, comprising spindle, vertically adjustable from
645 to 710 mm, top and bottom fittings and shelf bearings. Silver plastic.
800 x 800mm (for cabinet size) 54251211
900 x 900mm (for cabinet size) 54251221
 
54270200 - Quarter Carousel Set
Enlarge Image
To create full circle carousel, 542.70.200 is for use with item 542.51.211,
for cabinet sizes 800 x 800 mm (see Related Products)
To create full circle carousel, 542.70.210 is for use with item 542.51.221,
for cabinet sizes 900 x 900 mm (see Related Products)
Quarter circle carousel shelf, chrome plated steel, 2 pcs
Connecting clips, silver plastic, 4 pcs
800 x 800mm (for cabinet size) 54270200
900 x 900mm (for cabinet size) 54270210
 

54242712 - Half Circle Carousel Sets

Enlarge Image
For cabinets with hinged doors, shelves swivel independently
• Min. installation width 750 mm, min. installation depth 450 mm, for min.
door width 440 mm
• The upper end of the spindle can be cut if required to fit cabinets
with less height
2x Half circle carousel shelf. White plastic.
1x Fitting set comprising 500 mm high spindle, top and bottom fittings
and shelf bearings. Silver anodised light alloy spindle. White plastic fittings.
1x Shelf follower, for mounting on the cabinet door, automatically
pulls out the shelf when the door is opened. White plastic.
Spindle Height
410mm
500mm
   
440mm (min door width)
54242712
54242702
   
490mm (min door width)
54242703
   
 

54244702 - Three-Quarter Circle Carousel Sets

Enlarge Image
• For 800 mm or 900 mm cabinets with hinged doors, different height
adjustable fittings sets supplied with each, shelves swivel independently
2x Three-quarter circle carousel shelf, Ø 710 mm, white plastic
1x Fitting set comprising spindle, vertically adjustable from 667 to 713 mm (542.44.702) or 708 to 754 mm (542.44.703), upper and lower fittings, shelf bearings and brake mechanism. Fittings attach the spindle to the cabinet at the top and base. Chrome-plated steel spindle. White plastic fittings, shelf bearings and brake mechanism. 
Spindle Height
708-754mm
667-713mm
   
800 x 800mm
(cabinet size)
54244702
54244701
   
900 x 900mm
(cabinet size)
54244703
   
 

54284500 - Half Circle Plastic Carousel

Enlarge Image
• Two sizes of shelf available for min. door width 440 mm and 490 mm
• Shelves swivel independently
• For fitting in cabinets with hinged door
• Grey plastic tray with non-slip surface and chrome-plated steel or
aluminium effect plastic railing
Half circle carousel shelf (2 pcs)
Fitting set (1 set) comprising spindle, upper and lower fittings, shelf
bearings and brake mechanism. Fittings attach the spindle to the cabinet
at the top and base.
Shelf follower (1 pc), for mounting on the cabinet door. Automatically
pulls out the shelf when the door is opened 
Finish (Spindle height)
Aluminium effect
(410mm)
Chrome
(410mm)
Aluminium effect
(490mm)
Chrome
(490mm)
440mm (min door width)
54284500
54284200
   
490mm (min door width)
   
54284510
54284210
 

54285250 - Three-Quarter Circle Plastic Carousels

Enlarge Image
• For 800 x 800 mm or 900 x 900 mm cabinets
• Spindle height: 667-713 mm
• Shelves swivel independently
• For fitting in cabinets with hinged door
A - Three-quarter circle carousel shelf
B - Fitting set comprising spindle, upper and lower fittings, shelf bearings
and brake mechanism. Fittings attach the spindle to the cabinet at the
top and base.
• Grey plastic tray with non-slip surface and chrome plated-steel or
aluminium effect plastic railing
Finish (Spindle height)
Aluminium effect
(667-713mm)
Chrome
(67-713mm)
800/900mm
(for cabinet width)
54285550
54285250
 
|   RETURN TO TOP OF PAGE  |   Home   |   Profile   |   News   |   New   |   Contact   |   Terms   |   Index   |
Whilst every effort has been made to maintain the accuracy of the details contained within this Web-Site, Hart Wholesale reserve the right to change or amend any detail without redress. E & OE
© Copyright   Hart Wholesale 2005
Hart Wholesale are premier suppliers to the hardware and manufacturing trade. We stock the full range of BLUM hinges, BLUM kitchen fittings and BLUM drawer runners including the innovative BLUMOTION also Domus ducting, ventilation and Intumescent products, together with many thousands of items of hardware including HOSPA screws, hinges, stays, brackets, bolts, hooks etc. We also stock the full range of HERA low voltage lighting and HERA custom design lighting products. Also premier supplies of Veneers and
mouldings with mirror fittings. popular lines are such as window fittings and cabinet handles with draws and drawer runners and draw
runners. Many supplies around use of manufacturing products glides or knock down fittings. primary items such as intumescent or intumisant products and rigid pvc extrusion and wardrobe fittings. other lines frequently requested are radiatror grills, but most
importantly screws and fixings and blum products with hera lighting and ducting with our range of wood vaneers and vaneered
mouldings and weather seals.